Comparative Assessment between Indoor and Outdoor Three-Dimensional Laser Scanning by Using Smartphone LiDAR

  • Muhammad Asri Zulkiflee
  • Lau Chong Luh
  • Saiful Aman Sulaiman
  • Mohamad Hezri Razali
  • Mohd Azwan Abbas

Abstract

10
In this era, the rapid development of technology has enabled 3D laser scanning to be carried out through smartphones. The aim of this study is to assess the accuracy and effectiveness of iPhone LiDAR scanning in both indoor and outdoor environments by comparing it with conventional methods. The 3D Scanner App was used by iPhone LiDAR for scanning the interested object. Meanwhile, the CloudCompare and AutoCAD software were used to process data. In this study, the dimensions obtained using iPhone LiDAR were compared with the dimensions obtained using conventional methods like measuring tape and Total Station. The object that been scanned and measured in this study is a small object (not exceeding 1x1 meters). This object been scanned and measured in indoor classrooms and outdoor open areas in this study. Through this study, the range of RMSE is with 0.008m until 0.009m which is within centimeter level of accuracy for indoor scanning. Meanwhile, the outdoor scanning yielded slightly higher range of RMSE (in the range of 0.008m until 0.011m) compared to indoor scanning. In other word, the iPhone LiDAR is performing slightly better in indoor which is under control environment. Hence, iPhone LiDAR can be a cost-effective alternative to established techniques for accurate and quick 3D measurements.

References

Askar, C., & Sternberg, H. (2023). Use of smartphone LiDAR technology for low-cost 3D building documentation with iPhone 13 Pro: A comparative analysis of mobile scanning applications. Geomatics, 3(4), 563-579.
Chase, P., Clarke, K., Hawkes, A., Jabari, S., & Jakus, J. (2022). Apple iPhone 13 Pro LiDAR accuracy assessment for engineering applications. In Transforming Construction with Reality Capture Technologies (pp. 1-12).
Collis, R. T. (1970). LiDAR. Applied Optics, 9(8), 1782-1788.
Ebrahim, M. A. (2015). 3D laser scanners’ techniques overview. International Journal of Science Research, 4(10), 323-331.
Hakim, N. N., Razali, R., Said, M. M., Muhamad, M. A., Rahim, H. A., & Mokhtar, M. A. (2023). Accuracy assessment on detail survey plan using iPhone 13 Pro Max LiDAR sensor. International Journal of Geoinformatics, 19(5), 79-86.
Jaboyedoff, M., Oppikofer, T., Abellán, A., Derron, M. H., Loye, A., Metzger, R., & Pedrazzini, A. (2012). Use of LIDAR in landslide investigations: A review. Natural Hazards, 61(1), 5-28.
Razali, M. H., Idris, A. N., Nor, T. N., & Ghazali, R. (2021). Accuracy assessment on point cloud dataset from terrestrial laser scanner with different objects surface properties. In IOP Conference Series: Earth and Environmental Science (Vol. 767, No. 1, p. 012007). IOP Publishing.
Teppati Losè, L., Spreafico, A., Chiabrando, F., & Giulio Tonolo, F. (2022). Apple LiDAR sensor for 3D surveying: Tests and results in the cultural heritage domain. Remote Sensing, 14(17), 4157.
Wehr, A., & Lohr, U. (1999). Airborne laser scanning - An introduction and overview. ISPRS Journal of Photogrammetry and Remote Sensing, 54(2-3), 68-82.
Zaimovic-Uzunovic, N., & Lemes, S. (2010). Influences of surface parameters on laser 3D scanning. In IMEKO Conference Proceedings: International Symposium on Measurement and Quality Control (pp. D024-026). Osaka, Japan.
Published
2024-09-30
How to Cite
ZULKIFLEE, Muhammad Asri et al. Comparative Assessment between Indoor and Outdoor Three-Dimensional Laser Scanning by Using Smartphone LiDAR. International Journal of Business and Technology Management, [S.l.], v. 6, n. S1, p. 106-118, sep. 2024. ISSN 2682-7646. Available at: <https://myjms.mohe.gov.my/index.php/ijbtm/article/view/27675>. Date accessed: 06 nov. 2024.